​Upgrading your process equipment is more cost-effective than ever. We've added rebates for industrial process equipment to help you save money and energy on some of the hardest working equipment in your facility.

​Equipment ​Customer rebate Efficiency requirement
Industrial ​high-efficiency hot water boilers
$1,800/MMBtuh input 85 - 87.9%
Industrial ​condensing efficiency hot water boilers
​​​$3,500/MMBtuh input
​≥ 88%
​Industrial steam boilers (high- and low-pressure)

$500/MMBtuh input
≥ 83% thermal efficiency
​Industrial equipment tune-up*

Rebate increased to 35% of tune-up cost; eligible every other year*

​Industrial stack economizers (non-condensing)
​$500/MMBtuh input

​Industrial stack economizers (condensing)
​$1,000/MMBtuh input

​NEW! Industrial steam trap repair /replacements
Rebate increased to 40% of steam trap of repaired/replaced equipment costs*
NEW! Industrial ​Boiler turbulators
35% of equipment and installation costs, up to $750/boiler
NEW! Industrial modulating burner replacements

​Per MMBtu input; up to 25% of equipment cost
​NEW! Industrial stack dampers

​Per MMBtu boiler input; not to exceed 35% of the equipment and installation costs
NEW! Industrial boiler reset controls

​Per control system; not to exceed equipment cost
NEW! Industrial boiler cut-out controls

​Per control system; not to exceed equipment cost
NEW! Industrial linkageless controls
​Per MMBtu boiler input
NEW! Industrial pipe insulation
(hydronic heat, low- and high-pressure steam heat)

​$2.50/lineal foot (LF), retrofit only

*Industrial process equipment tune-up rebate increased from 25% to 35% of tune-up cost and process steam trap repair/replacement rebate increased from 35% to 40% of repaired/replaced equipment costs for rebate applications received between April 1 - July 1, 2024. Industrial process equipment tune-up eligible for rebate every other year.

All bonus rebate applications must be submitted by 7/1/24*. ​​​​​​​​

How to Receive Your Rebate

  1. Install equipment at a location using natural gas from CenterPoint Energy in Minnesota for a commercial account.*
  2. All applications must be received by Dec. 31 of the calendar year in which the equipment is installed. Program is valid from Jan. 1 through Dec. 31. Print and mail or fax along with your contractor invoice and other required documentation. To avoid delays, please submit your paperwork as soon as equipment installation is completed.
  3. Industrial process boiler component rebate (PDF)
    Industrial Process Equipment Rebate (PDF)​​​​

    Submit your completed paperwork and required documentation via email or mail to:

    Commercial Rebate Processing
    CenterPoint Energy
    PO Box 59038
    Minneapolis, MN 55459-0038 

  4. All six to eight weeks for rebate processing.

Rebate amounts vary by equipment. Rebate funds are limited to change without prior notice. Requests will be granted on a first-come, first-served basis. Caps are for one calendar year. Some utility rebates are taxable under Internal Revenue Service rules. Customers are responsible for all applicable taxes. CenterPoint Energy reserves the right to limit any rebate and conduct on-site inspection of installed equipment. All decisions by CenterPoint Energy regarding energy savings, cost savings, rebate amounts, and approvals are final. CenterPoint Energy cannot guarantee energy savings and does not warranty rebated equipment.​​​​​​​​​​​



​​​​​​All rebates must be submitted by Dec. 31, 2024.