Richfield - 18th Avenue S. and Cedar Avenue S.
Scheduled Start Date: July 30, 2021
- If you contact CenterPoint Energy for any questions, please reference the project’s name or number 87688049.
Beginning in the first week of August and lasting into late September 2021, CenterPoint Energy’s authorized contractors will work in Richfield along the following streets:
What will CenterPoint Energy do?
- 18th Avenue S. between 75th and 77th Streets E.
- 75th and 76th Streets E. between 18th Avenue S. and Cedar Avenue S.
- Cedar Avenue S. between 75th and 76th Streets E.
- 77th Street E. at 18th Avenue S.
Michels Corporation will replace the natural gas mains, connect the natural gas service lines to the new mains, and move any inside residential meters outside. They will also move a regulator station on 76th Street E. and relocate it to 77th Street E. Q3 Contracting will restore the areas affected by Michels Corporation’s work.
When the crews are replacing the mains and service lines, lane, parking and sidewalk closures will occur. When they are replacing the regulator station, they will close 76th Street E. between 18th and Cedar Avenues S., and they will close 77th Street E. at Cedar Avenue S. Local access will be maintained at all times.
What is CenterPoint Energy’s COVID-19 protocol?
The construction crews and personnel will continue to use the Covid-19 Customer Permission Flyer
, which requests customer permission prior to entering homes. Personnel, contractors and CenterPoint Energy employees will continue to practice CDC guidelines regarding social distancing, sanitary practices and wearing face masks when entering customer homes.
The customer will receive a CenterPoint Energy postcard in the mail typically within one or two weeks prior to the day when the Michels Corporation crews will perform the work. The crews will have CenterPoint Energy-authorized photo IDs stating that they are employees of Michels Corporation.
What if I have an inside gas meter?
After the customer receives the postcard, the foreman will arrive at the customer’s house to schedule an appointment that typically meets with the customer’s schedule. If the customer isn’t home when they arrive, they will leave a door tag with their contact information to schedule an appointment.
Customers are advised to set aside a two- to four-hour time frame for the inside-to-outside gas meter move. They are also advised to mark their privately-installed utilities such as dog fences or sprinklers.
Marking can be accomplished with tools such as spray paint or utility flags. The foreman will access the natural gas meter inside the house, move the meter outside, and relight the natural gas appliance pilot lights after the new meter has been relocated. Customers with outside meters will be notified prior to the replacement or connection of the service lines to the new mains.
What should I expect during restoration?
Crews from Q3 Contracting, CenterPoint Energy’s authorized contractor, will follow to restore the areas affected by Michels Corporation’s work, including hard and soft surfaces. On the soft surfaces such as boulevards and lawns, various erosion control measures keep the restored area moist, hold seed in the soil, and enhance seed germination. If an erosion blanket is needed it is secured in place with staples. The mesh is a wood fiber that will completely degrade. Prior to mowing the restored area, remove any loose staples that secured the blanket. For photo examples, please visit our Restoration Practices