CenterPoint Energy

Arkansas
Natural Gas Furnaces
Economical, reliable warmth


Save energy and money with a natural gas furnace. Buy a high efficiency model and save even more.

Today's natural gas furnaces can be up to 92% efficient or higher, helping you lower your heating bills for years to come. They provide reliable, even heat to keep your family warm and comfortable.

Learn more

 

You may need a new furnace if...

  • You would like to upgrade the efficiency of your home heating system.
  • Your current system needs frequent repairs or doesn't start at the beginning of a season.
  • Your furnace is 15 years old or older. The life expectancy of a furnace is 15 to 20 years.
  • You recently bought your home and do not know how old or safe your furnace is. Schedule a professional heating system check in the summer or fall to ensure you are ready for winter.

Shopping for a new furnace...

A new furnace usually costs $2,100 or more and plays a big part in your family's comfort at home. Here are some shopping tips:

  • Consider the efficiency. A higher efficiency furnace may cost more to purchase, but it can save as much as 20% to 35% per year on your heating bills, depending on the equipment you buy.
  • Buy from a reputable dealer. Choose someone you can trust that sells quality brand furnaces — this is a big purchase.
  • Talk to friends and neighbors. You can learn a lot by asking people who have gone through the process of buying a furnace and lived with it for a few years.
  • Get estimates. Compare efficiencies and installation costs of various models.
  • Get educated. Become an educated shopper before you buy.
  • Look for "Design Certified" models. This is a certification from the American Gas Association ensuring safety, reliability, and efficiency.

How a natural gas furnace works

Most homes have central heating systems which generate heat at a central point and distribute it by air, water, or steam to each room in the house. A furnace is a warm air central heating system that supplies heat to an air transfer system. Here's how it works:

  • Heated air rises from the furnace through large supply ducts.
  • Cool air returns to the furnace through cold air return ducts. The weight difference between warm and cool air keeps the air circulating.
  • Warm air is forced through supply ducts by a blower; it enters a room through registers or diffusers, then returns via a cold air duct to the furnace where it is filtered, reheated and recirculated.

Illustration forced air heating

 

Efficiency savings for natural gas furnaces

 

Old natural gas
furnace efficiency

New natural gas
furnace efficiency

  First-year savings*
  Ten-year savings*
 65%
 80%
 $183
  $1,830
   65%**
  92%
 $287
  $2,870
 65%
  94%
 $301
 $3,010

 * Based on average rates for all CenterPoint Energy residential customers of $1.05/Therm of natural gas for the three years ended 12/31/06. Actual savings may vary. These savings do not reflect the value of money over time.

** Since 1992, furnaces are required to have an Annual Fuel Utilization Efficiency (AFUE) of 78% or greater, and boilers must have an AFUE of 80% or greater, according to the U.S. Department of Energy.

 

Safety and your natural gas furnace

  • Keep furnace area clear of flammable liquids (gasoline, paint products, solvents or cleaners) and all combustible materials (newspaper, cardboard boxes or rags).
  • Furnaces run longer during very cold weather to maintain the thermostat setting, so duct and register surfaces may be hot. Keep children away.
  • If the pilot goes out, look for relighting instructions printed on the furnace. If it goes out repeatedly, call a qualified heating contractor.
  • Prevent unsafe levels of carbon monoxide. Have your furnace and all fuel-burning equipment checked by a professional once a year to be sure it is operating safely and has sufficient air for proper combustion.

Learn more about carbon monoxide safety in Natural Gas Safety.

 

Caring for your natural gas furnace

Home heating systems need periodic care to extend operating life, save energy, and increase efficiency. Use the following as general guidelines, but follow manufacturer's recommendations whenever possible.

 

Things you can do yourself...

  • Check chimney and vent connector (the pipe between the furnace and the chimney). Replace if there are rust holes or corrosion.
  • Oil pumps, blowers, and motors at least twice during the heating season. Some are permanently lubricated. Check manufacturer's instructions.
  • Clean blower blades. Dust and dirt reduce their air capacity, causing overheating and fuel waste.
  • For older models, check the V-belt and replace if worn or cracked. Newer models do not have belts.
  • Check your filter at least once a month during the heating and cooling seasons. (More if you have cats or dogs.)
  • If the pilot light goes out, look for relighting instructions printed on the furnace. If it goes out repeatedly, call a professional.

 

Call a professional when...

  • Your heating system is not working properly. Signs include:
    - Odors and/or irritation to your nose or eyes.
    - Soot and carbon deposits on the burner, in the combustion chamber, on the floor near the furnace/boiler or below the draft hood opening.
    - Buildup of dust, dirt or scale on burners and/or burner components.
    - A yellow flame rather than a blue flame.
    - Flame backing up and burning outside the combustion chamber.
    - Excessive humidity or frost on windows or walls.
  • Your natural gas burners need cleaning or adjusting.

Energy-saving tips

Here are some steps you can take to save energy and help lower your heating bills:

  • Check registers
    - Make sure supply dampers are open.
    - Move any drapes, furniture or carpet obstructing supply and/or return registers or grilles.
    - Repair any leaks in warm air ducts and cold air returns.
    - Wipe off dust plugging supply and/or return registers or grilles.
    - Remove high-pile carpet blocking baseboard radiators at bottom.
  • Dial down your thermostat to 65°F to 68°F during the day and 58°F at night or when you will be gone for four hours or longer. (Seniors, infants and people with certain medical conditions may need different temperature settings in order to avoid hypothermia or heat stress.)
  • Use a programmable/setback thermostat. They save energy by automatically adjusting your home's temperature setting on a preset schedule.
  • Insulate warm air ducts and cold air returns that pass through cold areas (such as an unheated basement, crawlspace, garage or unheated areas of your home). Use duct tape to repair any holes or cracks in seams before you insulate. See illustration.
     

Illustration warm air duct

Find more ways to save energy in Weatherize & Ventilate.

 Arkansas Heating system rebates

Appliance Calculator